TP-Link neffos N1, User Manual

Page: 9 / 96

3 Chapter 1
Get started
3. Insert the card tray back into your phone in the correct orientation.
or
Note:
1. Your phone only supports nano-SIM cards. Contact your carrier for a new or replacement nano-SIM card. You can
insert 2 nano-SIM cards, or 1 nano-SIM card and 1 micro-SD card. For more information, see Dual-SIM & network .
2. Ensure that the card is in the correct position and keep the card tray level when inserting it into your device.
3. Please exercise caution when using the SIM ejector pin to avoid hurting your fingers or damaging your phone.
4. The SIM eject pin should only be used to eject the SIM card tray. Inserting the SIM eject pin into other holes may
damage your device.
5. Store your pin in a safe place out of the reach of children to prevent accidental swallowing or injury.
1. 4 Initial setup
It is recommended to insert your SIM card before you start the initial setup.
Press and hold the Power button to turn on your phone, and then follow the onscreen instructions to complete
the initial setup.
1. Select your language, and then tap .
2. If you don’t insert any SIM card, your device will proceed to
Insert SIM cards
screen. Read the tips and
tap
SKIP
.
If you insert two SIM cards, your device will proceed to
Set up SIM cards
screen. Follow the onscreen
instructions to finish dual-SIM settings and tap
NEXT
. You can always adjust dual-SIM settings in
Settings
->
Dual-SIM & network
.
If you insert only one SIM card, your device will skip this step automatically.
3. Proceed to
Welcome to your Neffos N1
screen. You can configure your device in following two ways:
• Tap
Copy your data
and follow the onscreen instructions to restore a backup or copy from a device.
• Tap
Set up as new
to skip this step.
4. Proceed to
Get connected
screen. Your phone will automatically list available WLAN networks. Select the
network you want to connect to (If you want to view more Wi-Fi networks, tap
See all Wi-Fi networks
),
and then enter the password to access the Internet (This can take up to 2 minutes). If you have activated
mobile data services with your carrier, you can tap
Use cellular network for setup
. Or you can tap
Don’t
use any network for setup
->
CONTINUE
to skip this step.
Note:
Using cellular network for setup may result in additional fees. Contact your carrier for information about your cellular
data plan rates.