Configuring GVRP
GVRP Configuration
User Guide
197
2.1 Using the GUI
Choose the menu
L2 FEATURES > VLAN > GVRP > GVRP Config
to load the following
page.
Figure 2-1
GVRP Config
Follow these steps to configure GVRP:
1) In the
GVRP
section, enable GVRP globally, then click
Apply
.
2) In the
Port Config
section, select one or more ports, set the status as Enable and
configure the related parameters according to your needs.
Port
Select the desired port for GVRP configuration. It is multi-optional.
Status
Enable or disable GVRP on the port. By default, it is disabled.
Registration
Mode
Select the GVRP registration mode for the port.
Normal
: In this mode, the port can dynamically register and deregister VLANs,
and transmit both dynamic and static VLAN registration information.
Fixed
: In this mode, the port is unable to dynamically register and deregister
VLANs, and can transmit only the static VLAN registration information.
Forbidden
: In this mode, the port is unable to dynamically register and deregister
VLANs, and can transmit only information of VLAN 1.
Downloaded from
