139
Chapter 17
17 2 Control the LED
The LED of the router indicates its activities and status. You can enable the Night Mode
feature to specify a time period during which the LED is off.
1. Visit
http://tplinkwifi.net
or
http://192.168.0.1
, and log in with your TP-Link ID or the
password you set for the router.
2. Go to
Advanced
>
System
>
LED Control
.
3. Enable
Night Mode
.
4. Specify the LED off time, and the LED will be off during this period every day.
5. Click
SAVE
.
17 3 Test Internet Connectivity
Diagnostics function is used to test the connectivity between the router and the host
or other network devices.
1
Visit
http://tplinkwifi.net
or
http://192.168.0.1
, and log in with the password you set
for the router.
2
Go to
Advanced
>
System Tools
>
Diagnostics
page.
¾
To test the internet connection of the router:
Locate the
Diagnostic Tools
section, and click the
Start
to test the internet connectivity
and you will find the test results in the gray box.
