Switching
Configuring IGMP Snooping
User Guide
27
3
Configuring IGMP Snooping
Choose the menu
Switching > IGMP Snooping
to load the following page.
Figure 3-1
Configuring IGMP Snooping
Follow these steps to configure IGMP Snooping.
1) Enable IGMP Snooping. Enable or disable report message suppression according to
your needs. Click
Apply
.
IGMP Snooping
Enable or disable IGMP Snooping globally.
Report Message
Suppression
Enable or disable Report Message Suppression globally. When enabled, the
switch will only forward the first IGMP report message for each multicast group to
the IGMP querier during one query interval, and suppress subsequent IGMP report
messages for the same multicast group. This feature prevents duplicate report
messages from being sent to the IGMP querier.
2) In the table below, you can view the current IGMP group information.
IP Address
Displays the IP address of the multicast group.
VLAN ID
Displays the VLAN ID of the multicast group. All port members of a multicast
group should be included in the same VLAN.
Ports
Displays the forwarding port list of the multicast group.
