24
Chapter 5
Customize Your Network
5. Click
Save
.
¾
To enable or disable the extended network:
1. Go to
Settings
>
Wireless
>
Extended Network
.
2. Extended networks are enabled by default. If you want to disable the wireless function
of a certain band, just clear the
Enable
checkbox. In this case, all the wireless settings
of this band will be invalid.
3. Click
Save
.
¾
To change the wireless network name (SSID):
1. Go to
Settings
>
Wireless
>
Extended Network
.
2. Create a new SSID in
Extended 2.4GHz SSID
or click
Copy Host SSID
. The value is
case-sensitive.
3. Click
Save
.
Note:
If you have changed the wireless settings via a wireless device, you will be disconnected after the settings are applied.
Please write down the new SSID for future use.
¾
To hide the SSID of the extended network:
1. Go to
Settings
>
Wireless
>
Extended Network
.
2. Select
Hide SSID broadcast
, and the corresponding SSID will not be displayed when
wireless devices scan for local wireless networks. You need to manually enter the
SSID to join the network.
3. Click
Save
.
5 3 Change LAN Settings
The extender is preset with a default LAN IP 192.168.0.254, with which you can log in to
the web management page. The LAN IP address, together with the Subnet Mask, also
defines the subnet that the connected devices are on. If the IP address conflicts with
another device on your local network or your network requires a specific IP subnet, you
can change it.
1. Visit
http://tplinkrepeater.net
, and log in with the password you set for the extender.
2. Go to
Settings
>
Network
.
3. Select
Use the following IP address
.
4. Enter a new IP Address as needed and leave the
Subnet Mask
as the default settings .
5. Enter the gateway that is in the same subnet as the IP address. The gateway is usually
the LAN IP address of your router.
6. Enter the DNS IP address provided by your ISP.
