TP-Link Archer D9 User Manual Download Page 92

Page: 92 / 120

Chapter 13

Administrate Your Network

13 2 Update the Firmware

TP-LINK is dedicated to improving and enriching the product features, giving you a
better network experience. We will release the latest firmware at TP-LINK official
website, you can download the latest firmware file from our website:

www.tp-link.com

and upgrade the firmware to the latest version.
Follow the steps below to update your firmware to the latest.

Download the latest firmware file from our website:

www.tp-link.com

Visit

http://tplinkmodem.net

, and log in with the password you set for the modem

router.

Go to

Advanced

System Tools

Firmware Upgrade

page.

Click

Browse

to locate the downloaded new firmware file, and click

Upgrade

Wait for the upgrading and then the modem router will automatically reboot.

Note:

1. Before upgrading the firmware, it’s better to back up your current settings. For more details, refer to

Back up and

Restore Configuration Settings

2. During the upgrading process, do not turn off or reset the router.
3. The upgraded firmware version must correspond to the hardware.

Summary of Contents for Archer D9

























































































































Search results

Summary of Contents for Archer D9

Reviews:

Related manuals for Archer D9

Brands by name

Popular brands

TP-Link Archer D9, User Manual

Search results

Summary of Contents for Archer D9

Reviews:

Related manuals for Archer D9

Brands by name

Popular brands