Configure the router.
1.
Connect your device to the router (wired or wireless).
Wired:
Turn off the Wi-Fi on your computer and connect it to the router via an
Ethernet cable.
Wireless:
a.
Find the product label at the bottom of
the router.
b.
Use the default network names (SSIDs)
and password to join the 2.4 GHz or 5
GHz network.
Tip:
If you are using a smartphone or tablet,
you can also scan the QR code to join the
preset 2.4 GHz network directly.
Router Mode
1.
B
. Make sure that the
adjustable elbow is
facing up when
attached.
A
. Insert and screw the antenna
into the antenna socket.
2.
Slide the cap onto the antenna
until it fixes into place.
3.
Position the antenna
vertically for best Wi-Fi
performance.
Please note that the router provides three working modes:
Router, Repeater and Access Point. You can choose the
mode to better suit your network needs and follow the
guide to complete the configuration.
3.
Go to
Quick Setup
and follow the step-by-step instructions to complete
the setup.
2.
Launch a web browser, and enter
http://tplinkwifi.net
or
http://192.168.0.1
in the address bar. Create a password to log in.
Install the Antennas
Quick Installation Guide
High Power Wireless Dual Band Router
Note:
Images may differ from actual products.
Unplug your modem
, and
remove the backup battery
if it has one.
Power on the modem and
wait about
2 minutes
for it
to restart.
Connect the
power-off
modem to the router’s
WAN
port
via an Ethernet cable.
Modem
Connect the power adapter to the router and turn
on the router.
This mode enables multiple users to share internet connection via an ADSL/Cable Modem.
If your internet comes from an Ethernet outlet, connect the router’s
WAN port
to it, then skip Step 1, 2 and 3.
Verify that the following LEDs are solid on to
confirm the hardware is connected correctly.
WAN
ON
PWR
ON
2.4G
ON
5G
ON
3
1
2
6
5
4
Wireless Password/PIN:
XXXXXXXX
SSID:TP-Link_XXXX
SSID:TP-Link_XXXX_5G
QR
Code
Important
