TP-Link Archer AX20 Quick Installation Manual Download Page 1

New Password:

Let’s Get Started

Confirm Password:

http://tplinkwifi.net

If your internet connection is through an Ethernet cable directly from the wall instead of through a DSL / 

Cable / Satellite modem, connect the Ethernet cable to the router’s 

WAN

 port, and then follow steps 3 

and 4 to complete the hardware connection.

Connect the Hardware

Set Up the Network

Internet

1

2

3

4

Connect the powered-off 

modem to the router’s 

WAN 

port with an 

Ethernet cable.

Connect the power adapter to 

the router and turn on the router.

Choose your device type

Archer AX11000

Archer C5400X

Range Extender

Router

Archer AX6000

Method ONE: Via TP-Link Tether App

1. Download the Tether app.

Scan for Tether

Tether

or

2. Tap the      button in the Tether app and 

select Router > Wireless Router. Follow 

the steps to complete the setup and 

connect to the internet. 

Method TWO: Via a Web Browser

The default wireless network names (SSIDs) and password are printed 
on the label at the bottom of the router.

1. Connect your device to the router wirelessly 

or with an Ethernet cable.

2. Launch a web browser, and enter 

http://tplinkwifi.net or http://192.168.0.1 in 

the address bar. Create a password to log in.

3. Follow the step-by-step instructions to 

set up the internet connection and 

register for the TP-Link Cloud service.

Note: If the login window does not appear, please refer to 

Q1

 of 

Need 

Help?

 in this guide.

Model: Archer AX3000

AX3000 Gigabit Wi-Fi Router

Wireless Password/PIN:XXXXXXXX

SSID:TP-Link_XXXX

SSID:TP-Link_XXXX_5G

*Images may differ from actual products.

Power

On 

Internet

On

2.4GHz

On

5GHz

On

Verify that the hardware connection is correct by checking the following LEDs. 

Power on the modem, and then wait about 

2 minutes

 for it to restart.

Note: 

If the 2.4GHz LED and 5GHz LED are off, press and hold the WPS/Wi-Fi button on the back for more than 2 

seconds, then release the button. Both the LEDs should turn solid on.

Unplug the power

 

to turn off your modem, if any, 

and remove the backup battery if it has one.

Modem

Before You Start

Modem

Unplug the power

Reviews: