TP-Link Archer A20 AC4000 MU-MIMO User Manual Download Page 99

Page: 99 / 126

Chapter 13

Manage the Router

5. Click

Save

You can click

Test Email

to test whether the configuration is successful.

To recover the login password, please visit

http://tplinkwifi.net

, click

Forgot Password?

on the login page and follow the instructions to set a new password.

13 10 Local Management

This feature allows you to limit the number of client devices on your LAN from accessing
the router by using the MAC address-based authentication.
1. Visit

http://tplinkwifi.net

, and log in with your TP-Link ID or the password you set for

the router.

2. Go to

Advanced

System Tools

Administration

and complete the settings In

Local

Management

section as needed.

•

Allow Local Management via both HTTPS and HTTP:

Toggle on

Local Management via HTTPS

•

Allow all LAN connected devices to manage the router:

Toggle on

Access for All LAN Connected Devices

Summary of Contents for Archer A20 AC4000 MU-MIMO































































































































Search results

Summary of Contents for Archer A20 AC4000 MU-MIMO

Reviews:

Related manuals for Archer A20 AC4000 MU-MIMO

Brands by name

Popular brands

TP-Link Archer A20 AC4000 MU-MIMO, User Manual

Search results

Summary of Contents for Archer A20 AC4000 MU-MIMO

Reviews:

Related manuals for Archer A20 AC4000 MU-MIMO

Brands by name

Popular brands