Toyota Venza 2021, Manual

Page: 469 / 548

469
7-2. Steps to take in an emergency
7
Whe
n tr
ouble
a
rises
played on the multi-informa-
tion display.
*1
:Vehicles with 4.2-inch display
*2
:Vehicles with 7-inch display
4
Press the power switch
shortly and firmly.
In the event that the hybrid system
still cannot be started, contact your
Toyota dealer.
■ Stopping the hybrid system
Shift the shift lever to P, set the
parking brake and press the power
switch as you normally do when
stopping the hybrid system.
■ Replacing the key battery
As the above procedure is a tempo-
rary measure, it is recommended
that the electronic key battery be
replaced immediately when the bat-
tery is depleted. (

P.425)
■ Changing power switch modes
Release the brake pedal and press
the power switch in step
3
above.
The hybrid system does not start
and modes will be changed each
time the switch is pressed.
(

P.200)
If you have a set of jumper (or
booster) cables and a second
vehicle with a 12-volt battery,
you can jump start your vehicle
by following the steps below.
1
Vehicles with alarm: Confirm
that the electronic key is
being carried.
When connecting the jumper (or
booster) cables, depending on the
situation, the alarm may activate
and the doors locked. (

P.79)
2
Open the hood (

P.385) and
fuse box cover.
Push claw and to com-
pletely release the lock, and then lift
If the 12-volt battery is
discharged
The following procedures
may be used to start the
hybrid system if the vehi-
cle’s 12-volt battery is dis-
charged.
You can also call your
Toyota dealer or a qualified
repair shop.
Restarting the hybrid sys-
tem
A B