Toyota Tundra guide Manual Download Page 562

Page: 562 / 672

562

Indicates a malfunction in the Drive-start control.

A buzzer also sounds.

→

Have the vehicle inspected by your Toyota
dealer immediately.

Indicates that the shift position was changed and
Drive-Start Control was operated while depress-
ing the accelerator pedal.

→

Momentarily release the accelerator pedal.

(Flashes)

Indicates that the headlight switch is left on (with
the key removed and the driver’s door opened)

A buzzer also sounds.

→

Turn the lights off.

Indicates a malfunction in:
• The automatic headlight leveling system; or
• The LED headlight system (if equipped).

A buzzer also sounds.

→

Have the vehicle inspected by your Toyota
dealer.

(If equipped)

Indicates a malfunction in the Automatic High
Beam system.

→

Have the vehicle inspected by your Toyota
dealer.

Indicates that the tire inflation pressure is low.

→

Check the tire inflation pressure, and
adjust to the appropriate level.

(If equipped)

Indicates that the Automatic High Beam switch is
pressed while the headlights are in low beam.

→

Turn the high beam on and press the Auto-
matic High Beam switch again.

Warning message

Details/Actions

Drive-Start

Control

Malfunction

Visit Your Dealer

Release

Accelerator

Turn Lights Off

Headlight System

Malfunction

Visit Your Dealer

Headlight System

Malfunction

Visit Your Dealer

Tire Pressure Low

Check Tire

Auto High Beam Ready

Turn ON High Beam to

Activate

Summary of Contents for Tundra guide

































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Tundra guide

Reviews:

Toyota Tundra guide, Manual, Page: 562 / 672

Search results

Summary of Contents for Tundra guide

Reviews: