Toyota Tundra guide Manual Download Page 161 | Manualshive

Page: 161 / 672

background image

161

4-1. Before driving

4

Dr

■

Driving in the rain

●

Drive carefully when it is raining, because visibility will be reduced, the win-
dows may become fogged-up, and the road will be slippery.

●

Drive carefully when it starts to rain, because the road surface will be espe-
cially slippery.

●

Refrain from high speeds when driving on an expressway in the rain,
because there may be a layer of water between the tires and the road sur-
face, preventing the steering and brakes from operating properly.

■

Engine speed while driving

In the following conditions, the engine speed may become high while driving.
This is due to automatic up-shifting control or down-shifting implementation to
meet driving conditions. It does not indicate sudden acceleration.

●

The vehicle is judged to be driving uphill or downhill

●

When the accelerator pedal is released

●

When the brake pedal is depressed while TOW/HAUL mode is selected (if
equipped)

■

Restraining the engine output (Brake Override System)

●

When the accelerator and brake pedals are depressed at the same time, the
engine output may be restrained.

●

A warning message is displayed on the multi-information display while the
system is operating.

■

Restraining sudden start (Drive-Start Control)

●

When the following unusual operation is performed, the engine output may
be restrained.
• When the shift lever is shifted from R to D, D to R, N to R, P to D, or P to

R (D includes S) with the accelerator pedal depressed, a warning mes-
sage appears on the multi-information display.

• When the accelerator pedal is depressed too much while the vehicle is in

reverse.

●

While Drive-Start Control is being activated, your vehicle may have trouble
escaping from the mud or fresh snow. In such case, perform the following
actions to cancel Drive-Start Control so that the vehicle may become able to
escape from the mud or fresh snow.
• Deactivate TRAC (

• When the AUTO LSD system is turned on. (

→

• 4WD models: The four-wheel drive control switch is in “4L” position.

(

«
...
159
160
161
162
163
...
»

Summary of Contents for Tundra guide

































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Tundra guide

Brand: Lancia Pages: 191

Gemineye EC2014-C

Brand: Ecco Pages: 10

Reflex 5500 Series

Brand: Ecco Pages: 12

Brand: Yakima Pages: 11

Brand: Porsche Pages: 195

Brand: Tessera4x4 Pages: 20

01 29 9 416 497

Brand: BMW Pages: 5

Brand: Chariot Carriers Pages: 3

Brand: minnid Pages: 44

v.LOGiC Intelligent Solution V5-NTG46

Brand: Caraudio-Systems Pages: 18

Brand: Caltrend Pages: 2

Brand: Advanced ICE Pages: 4

Brand: Metra Electronics Pages: 2

Brand: M7 SPEED Pages: 6

Brand: Oldsmobile Pages: 354

GMC Yukon Denali 2005

Brand: Cadillac Pages: 456

Brand: Saab Pages: 63

Brand: R&G Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands