Toyota Tacoma 2012 Owner'S Manual Download Page 165

Page: 165 / 628

165

2-3. Operating the lights and wipers

en drivin

Turning on the high beam headlights

With the headlights on, push
the lever forward to turn on the
high beams.

Pull the lever back to the center
position to turn the high beams
off.

Pull the lever toward you to
turn on the high beams.

Release the lever to turn them off.
You can flash the high beams
with the headlights on or off.

Type B

off
Vehicles with day-
time running light
system: The daytime
running lights turn
on.

The side marker,
parking, tail, license
plate, daytime run-
ning lights (if
equipped) and instru-
ment panel lights turn
on.

The headlights and
all lights listed above
(except daytime run-
ning lights) turn on.

U.S.A.

Canada

Summary of Contents for Tacoma 2012





















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Tacoma 2012

Reviews:

Related manuals for Tacoma 2012

Brands by name

Popular brands

Toyota Tacoma 2012, Owner'S Manual

Search results

Summary of Contents for Tacoma 2012

Reviews:

Related manuals for Tacoma 2012

Brands by name

Popular brands