Toyota Sienna 2021 Manual Download Page 523

Page: 523 / 600

523

8-1. Specifications

Vehicle

specifications



17-inch tires



18-inch tires

Tires and wheels

Tire size

P235/65R17 103T, T155/80R17 111M (spare tire
if equipped)

Tire inflation pressure
(Recommended cold tire
inflation pressure)

Front:

35 psi (240 kPa, 2.4 kgf/cm

or bar)

Rear:

35 psi (240 kPa, 2.4 kgf/cm

or bar)

Driving at high speeds (above 100 mph [160
km/h]) (in countries where such speeds are per-
mitted by law) Add 3 psi (20 kPa, 0.2 kgf/cm

bar) to the front tires and rear tires.
Never exceed the maximum cold tire inflation
pressure indicated on the tire sidewall.
Spare:

60 psi (420 kPa, 4.2 kgf/cm

or bar)

Wheel size

17 x 7J, 17 x 4T (spare)

Wheel nut torque

76 ft•lbf (103 N•m, 10.5 kgf•m)

Tire size

P235/60R18 102V, T155/80R17 111M (spare tire
if equipped)

Tire inflation pressure
(Recommended cold tire
inflation pressure)

Front:

35 psi (240 kPa, 2.4 kgf/cm

or bar)

Rear:

35 psi (240 kPa, 2.4 kgf/cm

or bar)

Driving at high speeds (above 100 mph [160
km/h]) (in countries where such speeds are per-
mitted by law) Add 3 psi (20 kPa, 0.2 kgf/cm

bar) to the front tires and rear tires.
Never exceed the maximum cold tire inflation
pressure indicated on the tire sidewall.
Spare:

60 psi (420 kPa, 4.2 kgf/cm

or bar)

Summary of Contents for Sienna 2021

























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Sienna 2021

Reviews:

Toyota Sienna 2021, Manual, Page: 523 / 600

Search results

Summary of Contents for Sienna 2021

Reviews: