manualshive.com logo in svg

Toyota Sienna 2021, Manual, Page: 105 / 600

Share
Download
Toyota Sienna 2021 Manual Download Page 105

105

2-1. Instrument cluster

2

Vehicle

 statu

s information an

d in
dicator

s

Following information is dis-
played on the multi-information 
display.

Vehicles with 4.2-inch display

Driving support system infor-
mation

Displays recognized signs while the 
RSA system (if equipped) is operat-
ing. (

P.287)

Displays an image when the follow-
ing systems are operating and a 
menu icon other than 

 is 

selected:
• LTA (Lane Tracing Assist) 

(

P.277)

• Dynamic radar cruise control with 

full-speed range (

P.290)

Menu icons (

P.106)

Information display area

A variety of information can be dis-
played by selecting a menu icon.
Additionally, warning or sugges-
tion/advice pop-up displays will be 
displayed in some situations.

Vehicles with 7-inch display

Driving support system infor-
mation

Displays recognized signs while the 
RSA system (if equipped) is operat-
ing. (

P.287)

Displays an image when the follow-
ing systems are operating and a 
menu icon other than 

 is 

selected:
• LTA (Lane Tracing Assist) 

(

P.277)

• Dynamic radar cruise control with 

full-speed range (

P.290)

Information display area

A variety of information can be dis-
played by selecting a menu icon.
Additionally, warning or sugges-
tion/advice pop-up displays will be 
displayed in some situations.

Menu icons (

P.106)

Multi-information dis-

play

The multi-information dis-
play is used to display fuel 
efficiency related informa-
tion and various types of 
driving-related information. 
The multi-information dis-
play can also be used to 
change the display settings 
and other settings.

Display contents

A

B

C

A

B

C

Summary of Contents for Sienna 2021

























































































































































































































































































































































































































































































































































































































Reviews:

No comments