manualshive.com logo in svg

Toyota Sequoia guide, Manual

Share
Download
Toyota Sequoia guide Manual Download Page 60

60

1-1. For safe use

SEQUOIA_OM_USA_OM0C011U

Installing child restraints

Child restraint LATCH anchors

LATCH anchors are provided for all of the second seats. (Buttons display-
ing the location of the anchors are attached to the seats.)

Seat belts equipped with a child
restraint locking mechanism
(ALR/ELR belts except driver’s
seat belt) (

→

P. 32)

Follow the child restraint system manufacturer’s instructions.
Firmly secure child restraints to the seats using the LATCH
(Lower Anchors and Tethers for Children) anchors or a seat belt.
Attach the top tether strap when installing a child restraint.
The lap/shoulder belt can be used if your child restraint system
is not compatible with the LATCH system.

Second seat (separated type)

Second seat (bench type)

Summary of Contents for Sequoia guide























































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands