Home
/
Toyota
/
Sequoia guide
/
Manual

Toyota Sequoia guide, Manual, Page: 315 / 566

Share

Page: 315 / 566

Toyota Sequoia guide Manual Download Page 315

315

4-6. Driving tips

4

Drivin

SEQUOIA_OM_USA_OM0C011U

Winter driving tips

●

Use fluids that are appropriate to the prevailing outside tempera-
tures.

• Engine oil
• Engine coolant
• Washer fluid

●

Have a service technician inspect the condition of the battery.

●

Have the vehicle fitted with four snow tires or purchase a set of tire
chains for the rear tires.

Ensure that all tires are the same size and brand, and that chains match
the size of the tires.

Carry out the necessary preparations and inspections before
driving the vehicle in winter. Always drive the vehicle in a man-
ner appropriate to the prevailing weather conditions.

Preparation for winter

«
...
313
314
315
316
317
...
»

Summary of Contents for Sequoia guide























































































































































































































































































































































































































































































































































































Reviews:

No comments