Toyota Sequoia guide Manual Download Page 295

Page: 295 / 566

295

4-5. Using the driving support systems

Drivin

SEQUOIA_OM_USA_OM0C011U

AVS (Adaptive Variable Suspension System)

∗

Sport mode

For winding mountain road driving

or high speed driving.

Normal mode

For ordinary driving.

Comfort mode

For driving on a bumpy road.

■

Driving mode

●

Sport mode is suitable for winding mountain road driving, high speed driving
or towing a trailer.

●

Normal mode is suitable for ordinary driving.

∗

: If equipped

AVS controls the suspension according to the road and driving condi-

tions. Selecting an optimum driving mode allows good vehicle posture

and steering wheel operation.

AVS switch

Summary of Contents for Sequoia guide























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Sequoia guide

Reviews:

Toyota Sequoia guide, Manual, Page: 295 / 566

Search results

Summary of Contents for Sequoia guide

Reviews: