background image

249

4-5. Using the driving support systems

4

Drivin

g

SEQUOIA_OM_USA_OM0C011U

LDA (Lane Departure Alert)

When driving on roads with white (yellow) lines, this function alerts the
driver when the vehicle might depart from its lane.

The LDA system recognizes visi-
ble white (yellow) lines with the
camera sensor on the upper por-
tion of the front windshield.

Lane departure alert function

When the system determines
that the vehicle might depart
from its lane, a warning is dis-
played on the multi-information
display and the warning buzzer
sounds to alert the driver.

When the warning buzzer
sounds, check the surrounding
road situation and carefully
operate the steering wheel to
move the vehicle back to the
center of the lane.

Summary of functions

Functions included in LDA system

Summary of Contents for Sequoia guide























































































































































































































































































































































































































































































































































































Reviews: