5. Remove rear housing snap ring. Wrap tape on serrated part of pump shaft. Using soft-face hammer, tap
out rear housing, washer and side rear plate. Remove "O" rings.
6. Remove cam ring and 10 vane plates. See
Fig. 3
. Remove pump shaft with rotor and side front plate.
7. Remove snap ring from pump shaft. Remove 2 "O" rings from plate. Remove rotor and side front plate
from pump shaft. Remove short straight pin from side front plate and long straight pin from front
housing.
1999 Toyota RAV4
1999-2000 STEERING Power Rack & Pinion - Trucks
Microsoft
Sunday, November 22, 2009 10:35:46 AM
Page 9
© 2005 Mitchell Repair Information Company, LLC.
