manualshive.com logo in svg

Toyota RAV 4 2019, Manual, Page: 347 / 728

Share
Download
Toyota RAV 4 2019 Manual Download Page 347

347

4-5. Using the driving support systems

4

Driving

stop by the dynamic radar 
cruise control with full-speed 
range, the controlled stop will 
continue.

Press the Stop & Start cancel 
switch to disable the Stop & 
Start system. 
The Stop & Start cancel indica-
tor will illuminate. 

Pressing the switch again will 
enable the Stop & Start system and 
the Stop & Start cancel indicator will 
turn off. 

■

Automatic enabling of the Stop 

& Start system

If the Stop & Start system is dis-

abled using the Stop & Start cancel 

switch, it will be automatically re-

enabled once the engine switch is 

turned off and then the engine is 

started.

When the engine is stopped by 
the Stop & Start system when 
the vehicle is on an incline, 
when the brake pedal is 
released, brake force is tempo-

rarily maintained to prevent the 
vehicle from rolling backwards 
before the engine is restarted 
and drive force is generated. 
When drive force is generated, 
the maintained brake force is 
automatically canceled.

This function operates on flat 
surfaces as well as steep 
inclines.

Sound may be generated 
from the brake system, but 
this does not indicate a mal-
function.

Brake pedal response may 
change and vibration may 
occur, but this does not indi-
cate a malfunction.

■

Points for use

●

If the engine switch is pressed 

when the engine is stopped by the 

Stop & Start system, the engine 

will not be able to be restarted by 

the automatic engine start func-

tion. In this case, restart the 

engine using the normal engine 

starting procedure. (

P.194, 195)

●

When the engine is being 

restarted by the Stop & Start sys-

tem, the power outlets may be 

temporarily unusable, but this 

does not indicate a malfunction.

●

Installation and removal of electri-

cal components and wireless 

devices may affect the Stop & 

Start system. Contact your Toyota 

dealer for details.

●

When stopping the vehicle for a 

longer period of time, turn the 

engine switch off to stop the 

engine completely.

●

When the engine is restarted by 

the Stop & Start system, the steer-

Disabling the Stop & Start 
system

Hill-start assist control

Summary of Contents for RAV 4 2019

























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments