Toyota PT546-1C182 Owner'S Manual Download Page 92

Page: 92 / 144

4. Bluetooth

HANDS-FREE SYSTEM

Highlander_Navi_MXS

The

Bluetooth

word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc.

and any use of such marks by PIONEER CORPORATION is under license. Other trademarks and
trade names are those of their respective owners.

PROFILES

This system supports the following services.

Bluetooth

Device

Specification

Function

Require-

ments

Recommen-

dations

Bluetooth

Phone/
Bluetooth

Audio
Player

Bluetooth

Specification

Registering a
Bluetooth

device

Ver. 2.0

Ver. 3.0

+EDR

Bluetooth

Device

Profile

Function

Require-

ments

Recommen-

dations

Bluetooth

Phone

HFP (Hands-Free Profile)

Hands-free sys-
tem

Ver. 1.0

Ver. 1.6

OPP (Object Push Profile)

Transferring the
contacts

Ver. 1.1

Ver. 1.2

PBAP (Phone Book Ac-
cess profile)

Ver. 1.0

Ver. 1.1

MAP (Message Access
Profile)

Bluetooth

phone message



Ver. 1.0

Bluetooth

Audio
Player

A2DP (Advanced Audio
Distribution Profile)

Bluetooth

audio

system

Ver. 1.0

Ver. 1.2

AVRCP (Audio/Video Re-
mote Control Profile)

Ver. 1.0

Ver. 1.4

INFORMATION



If your cellular phone does not support HFP, registering the Bluetooth

phone or using

OPP, PBAP, MAP or SPP profiles individually will not be possible.



If the connected Bluetooth

device version is older than recommended or incompatible,

the Bluetooth

device function may not work properly.



Refer to http://www.toyota.com/connect to find approved Bluetooth

phones for this sys-

tem.

Summary of Contents for PT546-1C182

















































































































































Search results

Summary of Contents for PT546-1C182

Reviews:

Related manuals for PT546-1C182

Brands by name

Popular brands

Toyota PT546-1C182, Owner'S Manual

Search results

Summary of Contents for PT546-1C182

Reviews:

Related manuals for PT546-1C182

Brands by name

Popular brands