Toyota PT546-1C182, Owner'S Manual

Page: 78 / 144

78
Highlander_Navi_MXS
3. VOICE COMMAND SYSTEM
1. VOICE COMMAND SYSTEM
Talk button
 Press the talk button to start the voice
command system.
 To cancel voice recognition, press and
hold the talk button.

It is unnecessary to speak directly into the
microphone when giving a command.
The voice command system enables
the audio, hands-free systems, etc. to
be operated using voice commands.
Refer to the command list for samples
of voice commands. (
→ P.83)
USING THE VOICE
COMMAND SYSTEM
MICROPHONE
The actual design and microphone posi-
tion will differ depending on the vehicle.
For details, refer to vehicle
“Owner’s
Manual” .
US0006DS_8
INFORMATION
 The voice command system can be operated
while guidance is being spoken, when “Voice
Prompt Interrupt” (
→ P.134) is set to on. (It is
not necessary to wait for the confirmation
beep before speaking a command.)

Voice commands may not be recognized if:
• Spoken too quickly.
• Spoken at a low or high volume.
• The roof or windows are open.
• Passengers are talking while voice
commands are spoken.
• The air conditioning speed is set high.
• The air conditioning vents are turned
towards the microphone.
 In the following conditions, the system
may not recognize the command prop-
erly and using voice commands may not
be possible:
• The command is incorrect or unclear.
Note that certain words, accents or
speech patterns may be difficult for the
system to recognize.
• There is excessive background noise,
such as wind noise.