Toyota PT546-1C182, Owner'S Manual

Page: 68 / 144

68
2. AUDIO SYSTEM
Highlander_Navi_MXS
1
Open the cover of the USB/AUX port (if
equipped) and connect a portable
audio device.
 The USB/AUX port is located on the instru-
ment panel, or near the shift knob etc. The
actual design and port position will differ
depending on the vehicle. For details, refer
to vehicle
“Owner’s Manual” .
1
Press the “MEDIA” button.
 The audio system displays the current
source screen or displays the source
selection screen.
2
On the current source screen, touch
the
“Source” or press the “MEDIA”
button to display the audio source
selection screen.
3
Touch “AUX” on the screen.
 Only the volume can be adjusted using
the audio system controls.

The volume level depends on the output
level of the connected audio device itself.
CONNECTING A PORTABLE
AUDIO DEVICE
SWITCHING TO AUX MODE
INFORMATION
 If no portable audio device is connected,
“AUX” cannot be selected. Connect the
portable audio device to the AUX port.
PLAYING A PORTABLE
AUDIO DEVICE