Toyota PT546-1C182 Owner'S Manual Download Page 121

Page: 121 / 144

121

5. SETUP

Highlander_Navi_MXS

SE
TUP

Display the phone top screen. (



P.94)

Touch

“Settings”

Display the “Phone/Message Settings”
screen. (



P.120)

Touch

“Sound Settings”

Touch the desired item to be set.

DISPLAYING THE PHONE/
MESSAGE SETTINGS SCREEN
IN A DIFFERENT WAY

“Sound Settings” SCREEN

The call and ringtone volume can be
adjusted. A ringtone can be selected.

No.

Function

Touch to set the desired ringtone.

Touch

“+”

“-”

to adjust the ring-

tone volume.

Touch

“+”

“-”

to adjust the mes-

sage readout volume.

Touch to set the desired incoming
SMS/MMS tone.

Touch to adjust the incoming SMS/
MMS tone volume

Touch to set the desired incoming
email tone.

Touch to adjust the incoming e-mail
tone volume.

Touch

“+”

“-”

to adjust the de-

fault volume of the other party’s
voice.

Touch to reset all setup items.

INFORMATION



Depending on the type of phone, certain
functions may not be available.

Summary of Contents for PT546-1C182

















































































































































Search results

Summary of Contents for PT546-1C182

Reviews:

Related manuals for PT546-1C182

Brands by name

Popular brands

Toyota PT546-1C182, Owner'S Manual

Search results

Summary of Contents for PT546-1C182

Reviews:

Related manuals for PT546-1C182

Brands by name

Popular brands