manualshive.com logo in svg

Toyota Prius+, Owner'S Manual

Share
Download
Toyota Prius+ Owner'S Manual Download Page 525

5

525

5-2. Steps to take in an emergency

Wh
en tro

uble

 a

rises

PRIUS +_OM_OM47821E_(EE)

Starting the hybrid system when the 12-volt battery is discharged

The hybrid system cannot be started by push-starting.

To prevent 12-volt battery discharge

Turn off the headlights and the audio system while the hybrid system is
off.

Turn off any unnecessary electrical components when the vehicle is run-
ning at a low speed for an extended period, such as in heavy traffic.

When the 12-volt battery is removed or discharged

The hybrid system may not start. (

P. 415)

If the 12-volt battery is depleted with the shift position in P, it will not be
possible to shift the shift position other than P. In this case, the vehicle
cannot be towed without lifting both front wheels because the front
wheels are locked by the parking lock. (

P. 461)

When the 12-volt battery is reconnected, start the hybrid system, depress
the brake pedal, and confirm that it is possible to shift into each shift posi-
tion.

Charging the 12-volt battery

The electricity stored in the 12-volt battery will discharge gradually even
when the vehicle is not in use, due to natural discharge and the draining
effects of certain electrical appliances. If the vehicle is left for a long time, the
12-volt battery may discharge, and the hybrid system may be unable to start.
(The 12-volt battery recharges automatically while the hybrid system is oper-
ating.)

Summary of Contents for Prius+





































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands