Toyota Prius+ Owner'S Manual Download

Page: 171 / 580

171

1-8. Safety information

Be
fo

riv

PRIUS +_OM_OM47821E_(EE)

Airbag manual on-off system

Deactivating the front seat passenger airbag

Insert the mechanical key into
the cylinder and rotate to the
“OFF” position.

The “OFF” indicator turns on.

This system deactivates the front passenger airbag.
Only deactivate the airbags when using a child restraint system on
the front passenger seat.

“PASSENGER AIR BAG”
indicator

This indicator turns on when
the airbag system is “ON”.
(Only when the “POWER”
switch is in ON mode.)

Airbag manual on-off switch

Summary of Contents for Prius+





































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Prius+

Reviews:

Related manuals for Prius+

Brands by name

Popular brands

Toyota Prius+, Owner'S Manual

Search results

Summary of Contents for Prius+

Reviews:

Related manuals for Prius+

Brands by name

Popular brands