Toyota Prius+ Owner'S Manual Download Page 114

Page: 114 / 580

114

1-4. Adjustable components (seats, mirrors, steering wheel)

PRIUS +_OM_OM47821E_(EE)

Folding down the seatbacks

Pull the seatback angle adjust-
ment lever.

To return the rear seatbacks to their
original positions, lift them up until
they lock.



Seat belt hangers



Stowing the seat belt buckles

Stow the seat belts in their seat belt hang-
ers when not in use.

The buckle can be stowed when the seat-
belt is not in use.

Summary of Contents for Prius+





































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Prius+

Reviews:

Related manuals for Prius+

Brands by name

Popular brands

Toyota Prius+, Owner'S Manual

Search results

Summary of Contents for Prius+

Reviews:

Related manuals for Prius+

Brands by name

Popular brands