Toyota PRIUS 50 2020 Series Owner'S Manual Download Page 66 | Manualshive

Page: 66 / 551

Toyota PRIUS 50 2020 Series Owner'S Manual Download Page 66

64

1-2. Child safety

PRIUS_OM_OM47E17E_(AE)

WARNING

■

When installing a child restraint system

Observe the following precautions.
Failure to do so may result in death or serious injury.

●

Firmly attach the upper anchorage strap and make sure that the belt is not
twisted.

●

Do not attach the upper anchorage strap to anything other than the anchor
fitting.

●

After securing a child restraint system, never adjust the seat.

●

Follow all installation instructions provided by the child restraint system
manufacturer.

●

When installing the child restraint system with the head restraint being
raised, after the head restraint has been raised and then the anchor fitting
has been fixed, do not lower the head restraint.

■

Using child restraint anchorages

WARNING: child restraint anchorages are designed to withstand only those
loads imposed by correctly fitted child restraints. Under no circumstances
are they to be used for adult seatbelts, harnesses, or for attaching other
items or equipment to the vehicle.

«
...
64
65
66
67
68
...
»

Summary of Contents for PRIUS 50 2020 Series








































































































































































































































































































































































































































































































































































Reviews:

No comments