manualshive.com logo in svg

Toyota PRIUS 50 2020 Series, Owner'S Manual, Page: 487 / 551

Share
Download
Toyota PRIUS 50 2020 Series Owner'S Manual Download Page 487

485

7-2. Steps to take in an emergency

PRIUS_OM_OM47E17E_(AE)

7

W
hen

 trou

bl

e ari

s

e

s

WARNING

■

When using the compact spare tire (if equipped)

●

Remember that the spare tire provided is specifically designed for use with
your vehicle. Do not use your spare tire on another vehicle.

●

Do not use more than one compact spare tire simultaneously.

●

Replace the spare tire with a standard tire as soon as possible.

●

Avoid sudden acceleration, abrupt steering, sudden braking and shifting
operations that cause sudden engine braking.

■

When the compact spare tire is attached (if equipped)

The vehicle speed may not be correctly detected, and the following systems
may not operate correctly:

*

: If equipped

■

Speed limit when using the compact spare tire (if equipped)

Do not drive at speeds in excess of 80 km/h (50 mph) when a compact
spare tire is installed on the vehicle.

The compact spare tire is not designed for driving at high speeds. Failure to
observe this precaution may lead to an accident causing death or serious
injury.

■

After using the tools and jack

Before driving, make sure all the tools and jack are securely in place in their
storage location to reduce the possibility of personal injury during a collision
or sudden braking.

• ABS & Brake assist
• VSC
• TRC
• EPS
• AHB (Automatic High Beam)

*

• PCS (Pre-Collision System)

*

• LTA (Lane Tracing Assist)

*

• Dynamic radar cruise control with

full-speed range

*

• Cruise control

*

• BSM (Blind Spot Monitor)

*

• Toyota parking assist monitor

*

• Navigation system

*

Summary of Contents for PRIUS 50 2020 Series








































































































































































































































































































































































































































































































































































Reviews:

No comments