manualshive.com logo in svg

Toyota PRIUS 50 2020 Series, Owner'S Manual, Page: 478 / 551

Share
Download
Toyota PRIUS 50 2020 Series Owner'S Manual Download Page 478

476

7-2. Steps to take in an emergency

PRIUS_OM_OM47E17E_(AE)

WARNING

■

Using the tire jack

Observe the following precautions. 
Improper use of the tire jack may cause the vehicle to suddenly fall off the
jack, leading to death or serious injury.

●

Only use the tire jack that comes with this vehicle for replacing a flat tire. 
Do not use it on other vehicles, and do not use other tire jacks for replac-
ing tires on this vehicle.

●

Do not raise the vehicle while someone is inside.

●

Do not use the tire jack for any purpose other than replacing tires or install-
ing and removing tire chains.

●

Do not put any part of your body under the vehicle while it is supported by
the jack.

●

Do not start the hybrid system or drive the vehicle while the vehicle is sup-
ported by the jack.

●

When raising the vehicle, do not put an object on or under the jack.

●

Do not raise the vehicle to a height greater than that required to replace
the tire.

●

Use a jack stand if it is necessary to get under the vehicle.

●

When lowering the vehicle, make sure that there is no-one near the vehi-
cle. If there are people nearby, warn them vocally before lowering.

●

Put the jack properly in its jack point.
(

P. 480)

Summary of Contents for PRIUS 50 2020 Series








































































































































































































































































































































































































































































































































































Reviews:

No comments