Home
/
Toyota
/
PRIUS 50 2020 Series
/
Owner'S Manual

Toyota PRIUS 50 2020 Series, Owner'S Manual, Page: 401 / 551

Share

Page: 401 / 551

Toyota PRIUS 50 2020 Series Owner'S Manual Download Page 401

399

6-3. Do-it-yourself maintenance

PRIUS_OM_OM47E17E_(AE)

6

M

ai

nte

nan

ce and

ca
re

NOTICE

■

Driving on rough roads

Take particular care when driving on roads with loose surfaces or potholes.
These conditions may cause losses in tire inflation pressure, reducing the
cushioning ability of the tires. In addition, driving on rough roads may cause
damage to the tires themselves, as well as the vehicle’s wheels and body.

■

Low profile tires (vehicles with 215/45R17 tires)

Low profile tires may cause greater damage than usual to the wheel when
receiving impact from the road surface. Therefore pay attention to the fol-
lowing:

●

Be sure to use proper tire inflation pressure. If tires are under-inflated, they
may be damaged more severely.

●

Avoid pot holes, uneven pavement, curbs and other road hazards. Failure
to do so can lead to severe tire and wheel damage.

■

If tire inflation pressure of each tire becomes low while driving

Do not continue driving, or your tires and/or wheels may be ruined.

«
...
399
400
401
402
403
...
»

Summary of Contents for PRIUS 50 2020 Series








































































































































































































































































































































































































































































































































































Reviews:

No comments