manualshive.com logo in svg

Toyota PRIUS 50 2020 Series, Owner'S Manual, Page: 365 / 551

Share
Download
Toyota PRIUS 50 2020 Series Owner'S Manual Download Page 365

363

5-4. Using the other interior features

PRIUS_OM_OM47E17E_(AE)

5

In

teri

or f

eatu

res

Pull the armrest down for use.

The coat hooks are provided with
the rear assist grips.

Armrest

NOTICE

To prevent damage to the armrest, do not place too much strain on the arm-
rest.

Coat hooks

WARNING

Do not hang coat hangers or other hard or sharp objects on the hook. If the
SRS curtain shield airbags deploy, these items may become projectiles,
causing death or serious injury.

Summary of Contents for PRIUS 50 2020 Series








































































































































































































































































































































































































































































































































































Reviews:

No comments