manualshive.com logo in svg

Toyota PRIUS 50 2020 Series, Owner'S Manual, Page: 357 / 551

Share
Download
Toyota PRIUS 50 2020 Series Owner'S Manual Download Page 357

355

5-4. Using the other interior features

PRIUS_OM_OM47E17E_(AE)

5

In

teri

or f

eatu

res

Other interior features

To set the visor in the forward
position, flip it down.

To set the visor in the side posi-
tion, flip down, unhook, and
swing it to the side.

Slide the cover to open.

The light turns on when the cover
is opened.

If the vanity lights remain on when the power switch is turned off, the light will
go off automatically after 20 minutes.

Sun visors

1

2

1

2

Vanity mirrors

NOTICE

To prevent 12-volt battery discharge, do not leave the vanity lights on for
extended periods while the hybrid system is off.

Summary of Contents for PRIUS 50 2020 Series








































































































































































































































































































































































































































































































































































Reviews:

No comments