Toyota PRIUS 50 2020 Series, Owner'S Manual

Page: 279 / 551

277
4-5. Using the driving support systems
4
D
riv
in
g
PRIUS_OM_OM47E17E_(AE)
■
Conditions in which the function may not operate or detect correctly
In the following situations, RSA does not operate normally and may not rec-
ognize signs, display the incorrect sign, etc. However, this does not indicate a
malfunction.
●
The front camera is misaligned due to a strong impact being applied to the
sensor, etc.
●
Dirt, snow, stickers, etc. are on the windshield near the front camera.
●
In inclement weather such as heavy rain, fog, snow or sand storms
●
Light from an oncoming vehicle, the sun, etc. enters the front camera.
●
The sign is dirty, faded, tilted or bent.
●
The contrast of electronic sign is low.
●
All or part of the sign is hidden by the leaves of a tree, a pole, etc.
●
The sign is only visible to the front camera for a short amount of time.
●
The driving scene (turning, lane change, etc.) is judged incorrectly.
●
If a sign not appropriate for the currently traveled lane, but the sign exists
directly after a freeway branches, or in an adjacent lane just before merging.
●
Stickers are attached to the rear of the preceding vehicle.
●
A sign resembling a system compatible sign is recognized.
●
Side road speed signs may be detected and displayed (if positioned in sight
of the front camera) while the vehicle is traveling on the main road.
●
Roundabout exit road speed signs may be detected and displayed (if posi-
tioned in sight of the front camera) while traveling on a roundabout.
●
The front of the vehicle is raised or lowered due to the carried load
●
The surrounding brightness is not sufficient or changes suddenly.
●
When a sign intended for trucks, etc. is recognized.
●
The speed information displayed on the meter and on the navigation system
may be different due to the navigation system using map data.
■
Speed limit sign display
If the power switch was last turned off while a speed limit sign was displayed
on the main display or multi-information display, the same sign displays again
when the power switch is turned to ON mode.
■
If “RSA Malfunction Visit Your Dealer” is shown
The system may be malfunctioning. Have the vehicle inspected by your
Toyota dealer.
■
Customization
Some functions can be customized. (Customizable features:

P. 518)