manualshive.com logo in svg

Toyota PRIUS 50 2020 Series, Owner'S Manual, Page: 244 / 551

Share
Download
Toyota PRIUS 50 2020 Series Owner'S Manual Download Page 244

242

4-5. Using the driving support systems

PRIUS_OM_OM47E17E_(AE)

Toyota Safety Sense

◆

PCS (Pre-Collision System)

P. 248

◆

LTA (Lane Tracing Assist)

P. 259

◆

AHB (Automatic High Beam)

P. 226

◆

RSA (Road Sign Assist)

P. 274

◆

Dynamic radar cruise control with full-speed range

P. 278

: If equipped

The Toyota Safety Sense consists of the following drive assist
systems and contributes to a safe and comfortable driving expe-
rience:

Driving assist system

WARNING

■

Toyota Safety Sense

The Toyota Safety Sense is designed to operate under the assumption that
the driver will drive safely, and is designed to help reduce the impact to the
occupants and the vehicle in the case of a collision or assist the driver in
normal driving conditions. 
As there is a limit to the degree of recognition accuracy and control perfor-
mance that this system can provide, do not overly rely on this system. The
driver is always responsible for paying attention to the vehicle’s surround-
ings and driving safely.

Summary of Contents for PRIUS 50 2020 Series








































































































































































































































































































































































































































































































































































Reviews:

No comments