Home
/
Toyota
/
PRIUS 50 2020 Series
/
Owner'S Manual

Toyota PRIUS 50 2020 Series, Owner'S Manual, Page: 199 / 551

Share

Page: 199 / 551

Toyota PRIUS 50 2020 Series Owner'S Manual Download Page 199

197

4-1. Before driving

4

D

riv

in

g

PRIUS_OM_OM47E17E_(AE)

WARNING

Observe the following precautions.
Failure to do so may result in death or serious injury.

■

When shifting the shift position

●

Do not let the vehicle roll backward while a forward driving position is
selected, or roll forward while the shift position is in R.
Doing so may result in an accident or damage to the vehicle.

●

Do not shift the shift position to P while the vehicle is moving.
Doing so can damage the transmission and may result in a loss of vehicle
control.

●

Do not shift the shift position to R while the vehicle is moving forward.
Doing so can damage the transmission and may result in a loss of vehicle
control.

●

Do not shift the shift position to a driving position while the vehicle is mov-
ing backward.
Doing so can damage the transmission and may result in a loss of vehicle
control.

●

Changing the shift position to N while the vehicle is moving will disengage
the hybrid system. Engine braking is not available with the hybrid system
disengaged.

●

Be careful not to change the shift position with the accelerator pedal
depressed.
Changing the shift position to any position other than P or N may lead to
unexpected rapid acceleration of the vehicle that may cause an accident
and result in death or serious injury.
Doing so can damage the transmission and may result in a loss of vehicle
control.

After changing the shift position, make sure to confirm the current shift
position displayed on the shift position indicator inside the meter.

«
...
197
198
199
200
201
...
»

Summary of Contents for PRIUS 50 2020 Series








































































































































































































































































































































































































































































































































































Reviews:

No comments