manualshive.com logo in svg

Toyota PRIUS 50 2020 Series, Owner'S Manual, Page: 171 / 551

Share
Download
Toyota PRIUS 50 2020 Series Owner'S Manual Download Page 171

169

3-3. Adjusting the seats

3

O

pe
rati
on 
of e

ac
h c
om
pon

ent

PRIUS_OM_OM47E17E_(AE)

■

When adjusting the seat

Take care when adjusting the seat so that the head restraint does not touch
the ceiling.

WARNING

■

When adjusting the seat position

●

Take care when adjusting the seat position to ensure that other passen-
gers are not injured by the moving seat.

●

Do not put your hands under the seat or near the moving parts to avoid
injury. 
Fingers or hands may become jammed in the seat mechanism.

■

Seat adjustment

●

To reduce the risk of sliding under the lap belt during a collision, do not
recline the seat more than necessary.
If the seat is too reclined, the lap belt may slide past the hips and apply
restraint forces directly to the abdomen, or your neck may contact the
shoulder belt, increasing the risk of death or serious injury in the event of
an accident. 
Adjustments should not be made while driving as the seat may unexpect-
edly move and cause the driver to lose control of the vehicle.

●

Manual seats: After adjusting the seat, make sure that the seat is locked in
position.

Summary of Contents for PRIUS 50 2020 Series








































































































































































































































































































































































































































































































































































Reviews:

No comments