Toyota PRIUS 50 2020 Series Owner'S Manual Download Page 162

Page: 162 / 551

160

3-2. Opening, closing and locking the doors

PRIUS_OM_OM47E17E_(AE)

NOTICE

■

Back door damper stays

The back door is equipped with damper stays that hold the back door in
place.

Observe the following precautions.
Failure to do so may cause damage to the back door damper stay, resulting
in malfunction.

●

Do not place your hand on the damper stay or apply lateral forces to it.

●

Do not attach any foreign objects, such
as stickers, plastic sheets, or adhesives
to the damper stay rod.

●

Do not touch the damper stay rod with
gloves or other fabric items.

●

Do not attach any accessories other
than genuine Toyota parts to the back
door.

Summary of Contents for PRIUS 50 2020 Series








































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PRIUS 50 2020 Series

Reviews:

Toyota PRIUS 50 2020 Series, Owner'S Manual, Page: 162 / 551

Search results

Summary of Contents for PRIUS 50 2020 Series

Reviews: