manualshive.com logo in svg

Toyota Prius 2018, Owner'S Manual, Page: 665 / 820

Share
Download
Toyota Prius 2018 Owner'S Manual Download Page 665

665

PRIUS_OM_OM47B89U_(U)

8

Wh

en tro

uble

 a

ris

es

8-1. Essential information

If your vehicle has to be stopped in an 

emergency

Steadily step on the brake pedal with both feet and firmly depress it.

Do not pump the brake pedal repeatedly as this will increase the effort
required to slow the vehicle.

Shift the shift position to N.

If the shift position is shifted to N

After slowing down, stop the vehicle in a safe place by the road.

Stop the hybrid system.

If the shift position cannot be shifted to N

Keep depressing the brake pedal with both feet to reduce vehicle
speed as much as possible.

To stop the hybrid system,
press and hold the power
switch for 2 consecutive sec-
onds or more, or press it briefly
3 times or more in succession.

Stop the vehicle in a safe place by the road.

Only in an emergency, such as if it becomes impossible to stop
the vehicle in the normal way, stop the vehicle using the follow-
ing procedure:

1

2

3

4

3

Press and hold for 2 seconds or 
more, or press briefly 3 times or 
more

4

WARNING

■

If the hybrid system has to be turned off while driving

Power assist for the steering wheel will be lost, making the steering wheel
heavier to turn. Decelerate as much as possible before turning off the hybrid
system.

5

Summary of Contents for Prius 2018





















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments