manualshive.com logo in svg

Toyota Prius 2018, Owner'S Manual, Page: 641 / 820

Share
Download
Toyota Prius 2018 Owner'S Manual Download Page 641

PRIUS_OM_OM47B89U_(U)

641

7-3. Do-it-yourself maintenance

7

Mainten

ance an

d ca

re

NOTICE

■

When cleaning the air intake vent

■

To prevent damage to the vehicle

●

Do not allow water or foreign matter to enter the air intake vent when the
cover is removed.

●

Carefully handle the removed filter so that it will not be damaged. If the fil-
ter is damaged, have it replaced with a new filter by your Toyota dealer.

●

Make sure to reinstall the filter and cover to their original positions after
cleaning.

●

Do not install anything to the air intake vent other than the exclusive filter
for this vehicle or use the vehicle without the filter installed.

■

If “Maintenance required for Traction battery cooling parts See owner’s
manual” is shown on the multi-information display

If the vehicle is continuously driven with the warning message shown, the
hybrid battery (traction battery) may overheat, possibly causing a malfunc-
tion. If the warning message is shown, clean the air intake vent immediately.

When cleaning the air intake vent, make
sure to only use a vacuum to suck out
dust and clogs. If a compressed air blow
gun, etc. is used to blow out dust and
clogs, the dust or clogs may be pushed
into the air intake vent, which may affect
the performance of the hybrid battery
(traction battery) and cause a malfunc-
tion.

Summary of Contents for Prius 2018





















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments