manualshive.com logo in svg

Toyota Prius 2018, Owner'S Manual, Page: 591 / 820

Share
Download
Toyota Prius 2018 Owner'S Manual Download Page 591

591

PRIUS_OM_OM47B89U_(U)

7-2. Maintenance

7

Mainten

ance an

d ca

re

Maintenance requirements

General maintenance should be performed on a daily basis. This can
be done by yourself or by a Toyota dealer.

Scheduled maintenance should be performed at specified intervals
according to the maintenance schedule.

For details about maintenance items and schedules, refer to the “Sched-
uled Maintenance Guide” or “Owner’s Manual Supplement”.

You can perform some maintenance procedures by yourself. 
Please be aware that do-it-yourself maintenance may affect warranty
coverage.

The use of Toyota repair manuals is recommended.

For details about warranty coverage, refer to the separate “Owner’s War-
ranty Information Booklet” or “Owner’s Manual Supplement”.

To ensure safe and economical driving, day-to-day care and reg-
ular maintenance are essential. It is the owner’s responsibility to
perform regular checks. Toyota recommends the following main-
tenance:

General maintenance

Scheduled maintenance

Do-it-yourself maintenance

Summary of Contents for Prius 2018





















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments