manualshive.com logo in svg

Toyota Prius 2018, Owner'S Manual, Page: 586 / 820

Share
Download
Toyota Prius 2018 Owner'S Manual Download Page 586

586

PRIUS_OM_OM47B89U_(U)

7-1. Maintenance and care

NOTICE

■

Handling the decorative resin parts (for vehicles equipped with 17-
inch tires)

●

Make sure to observe the following when handling wheels equipped
with decorative resin parts. Failure to observe these precautions may
result in damage to the decorative resin parts or wheels.

• Do not remove the decorative resin parts

When decorative resin parts removal is necessary, contact your Toyota
dealer.

●

If there is rattling in the decorative resin parts, or strange sounds from
the wheel area when driving, have your wheels inspected at your Toy-
ota dealer.

■

When using an automatic car wash (vehicles with rain-sensing wind-
shield wipers)

Set the wiper switch to the off position.
If the wiper switch is in “AUTO” the wipers may operate and the wiper
blades may be damaged.

• Do not hold the tire by the decora-

tive resin parts to lift up or carry the
tire.

Summary of Contents for Prius 2018





















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments