Toyota Prius 2018 Owner'S Manual Download Page 497

Page: 497 / 820

PRIUS_OM_OM47B89U_(U)

497

5-9. Bluetooth

phone

Audi

o system

Display the “Phone/Message Settings” screen. (

→

P. 489)

Select “Messaging Settings”.

Select the desired item to be set.

Set automatic message
transfer on/off.

Set automatic message
readout on/off.

Set the SMS/MMS notifica-
tion popup on/off.

Set the e-mail notification
popup on/off.

Set adding the vehicle signa-
ture to outgoing messages
on/off.

Set updating message read status on phone on/off.

Change the incoming SMS/MMS display.

“Full Screen”: When an SMS/MMS message is received, the incoming
SMS/MMS display screen is displayed and can be operated on the
screen.

“Drop-Down”: When an SMS/MMS message is received, a message is
displayed on the upper side of the screen.

Change the incoming e-mail display.

“Full Screen”: When an e-mail is received, the incoming e-mail display
screen is the displayed and can be operated on the screen.

“Drop-Down”: When an e-mail is received, a message is displayed on
the upper side of the screen.

Set display of messaging account names on the inbox tab on/off.

When set to on, messaging account names used on the cellular phone
will be displayed.

■

To return to the default settings

Select “Default”, and then “Yes”.

Message Settings

6
7

Summary of Contents for Prius 2018





















































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Prius 2018

Reviews:

Toyota Prius 2018, Owner'S Manual, Page: 497 / 820

Search results

Summary of Contents for Prius 2018

Reviews: