manualshive.com logo in svg

Toyota Prius 2018, Owner'S Manual, Page: 253 / 820

Share
Download
Toyota Prius 2018 Owner'S Manual Download Page 253

253

PRIUS_OM_OM47B89U_(U)

4-3. Operating the lights and wipers

4

Drivin

g

Automatic High Beam

∗

Push the lever away from you
with the headlight switch in the

 or 

 position.

Press the Automatic High
Beam switch.

The Automatic High Beam indica-
tor will come on when the head-
lights are turned on automatically
to indicate that the system is
active.

∗

: If equipped

The Automatic High Beam uses an in-vehicle camera sensor to
assess the brightness of streetlights, the lights of vehicles
ahead etc., and automatically turns the high beam on or off as
necessary.

WARNING

■

Limitations of the Automatic High Beam

Do not rely on the Automatic High Beam. Always drive safely, taking care to
observe your surroundings and turning the high beam on or off manually if
necessary.

■

To prevent incorrect operation of the Automatic High Beam system

Do not overload the vehicle.

Activating the Automatic High Beam system

1

2

Summary of Contents for Prius 2018





















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments