Toyota Prius 2018 Page 250 Owner'S Manual Download

Page: 250 / 820

250

PRIUS_OM_OM47B89U_(U)

4-3. Operating the lights and wipers



Canada

The headlights, side
marker, parking lights,
LED accent lights (if
equipped), daytime run-
ning lights (

→

P. 251)

and so on turn on and
off automatically (when
the power switch is in
ON mode).

The side marker, park-
ing, LED accent (if
equipped), tail, license
plate, instrument panel
lights, and daytime run-
ning lights (

→

P. 251)

turn on.

The headlights and all the lights listed above (except day-
time running lights) turn on.

The daytime running lights turn on. (

→

P. 251)

With the headlights on, push
the lever away from you to turn
on the high beams.

Pull the lever toward you to the
center position to turn the high
beams off.

Pull the lever toward you and
release it to flash the high
beams once.

You can flash the high beams with the headlights on or off.

Turning on the high beam headlights

Summary of Contents for Prius 2018





















































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Prius 2018

Reviews:

Related manuals for Prius 2018

Brands by name

Popular brands

Toyota Prius 2018, Owner'S Manual

Search results

Summary of Contents for Prius 2018

Reviews:

Related manuals for Prius 2018

Brands by name

Popular brands