manualshive.com logo in svg

Toyota Prius 2018, Owner'S Manual, Page: 209 / 820

Share
Download
Toyota Prius 2018 Owner'S Manual Download Page 209

PRIUS_OM_OM47B89U_(U)

209

3-5. Opening and closing the windows and moon roof

3

Op
eration

 o

f each

 compo

nen

t

■

The moon roof can be operated when

The power switch is in ON mode. 

■

Operating the moon roof after turning the hybrid system off

The moon roof can be operated for approximately 45 seconds even after the
power switch is turned to ACCESSORY mode or turned off. It cannot, how-
ever, be operated once either front door is opened. 

■

Jam protection function

If an object is detected between the moon roof and the frame while the moon
roof is closing or tilting down, travel is stopped and the moon roof opens
slightly.

■

Sunshade

The sunshade can be opened and closed manually. However, the sunshade
will open automatically to slightly before the fully open position when the
moon roof is opened. 

■

Door lock linked moon roof operation

●

The moon roof can be opened and closed using the mechanical key.

*

 

(

→

P. 726)

●

The moon roof can be opened using the wireless remote control.

*

 

(

→

P. 172)

*

: These settings must be customized at your Toyota dealer.

Summary of Contents for Prius 2018





















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments