manualshive.com logo in svg

Toyota Prius 2018, Owner'S Manual, Page: 204 / 820

Share
Download
Toyota Prius 2018 Owner'S Manual Download Page 204

204

PRIUS_OM_OM47B89U_(U)

3-5. Opening and closing the windows and moon roof

Power windows

The power windows can be opened and closed using the switches.

Operating the switch moves the side windows as follows:

Closing

One-touch closing

*

Opening

One-touch opening

*

*

: To stop the side window partway,

operate the switch in the opposite
direction.

Press the switch down to lock the
passenger windows.

Use this switch to prevent children
from accidentally opening or clos-
ing a passenger window.

Press the switch again to unlock
the passenger windows.

■

The power windows can be operated when

The power switch is in ON mode.

■

Operating the power windows after turning the hybrid system off

The power windows can be operated for approximately 45 seconds even
after the power switch is turned to ACCESSORY mode or turned off. They
cannot, however, be operated once either front door is opened. 

Opening and closing procedures

1
2
3
4

Window lock switch

Summary of Contents for Prius 2018





















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments