Toyota Prius 2018 Page 174 Owner'S Manual Download

Page: 174 / 820

174

PRIUS_OM_OM47B89U_(U)

3-2. Opening, closing and locking the doors

The door cannot be opened from
inside the vehicle when the lock is
set.

Unlock

Lock

These locks can be set to prevent
children from opening the rear
doors. Push down on each rear
door switch to lock both rear doors.

The following functions can be set or canceled:

For instructions on customizing, refer to P. 770.

Rear door child-protector lock

1
2

Automatic door locking and unlocking systems

Function

Operation

Shift position linked door lock-
ing function

Shifting the shift position to any positions
other than P locks all the doors.

Shift position linked door
unlocking function

Shifting the shift position to P unlocks all
the doors.

Speed linked door locking
function

All the doors are locked when the vehicle
speed is approximately 12 mph (20 km/h)
or higher.

Driver’s door linked door
unlocking function

All the doors are unlocked when the
driver’s door is opened within approxi-
mately 45 seconds after turning the power
switch off.

Summary of Contents for Prius 2018





















































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Prius 2018

Reviews:

Related manuals for Prius 2018

Brands by name

Popular brands

Toyota Prius 2018, Owner'S Manual

Search results

Summary of Contents for Prius 2018

Reviews:

Related manuals for Prius 2018

Brands by name

Popular brands