manualshive.com logo in svg

Toyota Prius 2018, Owner'S Manual, Page: 171 / 820

Share
Download
Toyota Prius 2018 Owner'S Manual Download Page 171

171

PRIUS_OM_OM47B89U_(U)

3-2. Opening, closing and locking the doors

3

Op
eration

 o

f each

 compo

nen

t

Side doors

◆

Smart key system 

Carry the electronic key to enable this function.

Grip the driver’s door handle
to unlock the door. Holding
the driver’s door handle for
approximately 2 seconds
unlocks all the doors. 
Some models, grip the front
passenger’s door handle to
unlock all the doors

*

.

Make sure to touch the sensor on the back of the handle.

The doors cannot be unlocked for 3 seconds after the doors are locked.

*

: The door unlock settings can be changed. (

→

P. 175)

Touch the lock sensor (the indentation on the surface of the front
door handle) to lock the doors.

Check that the door is securely locked.

The vehicle can be locked and unlocked using the entry func-
tion, wireless remote control or door lock switches. 

Unlocking and locking the doors from the outside

1

2

Summary of Contents for Prius 2018





















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments